Xerox DocuPrint 180 Configuration Manual page 255

Removing orphan data files
XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Orphan data files are files that do not belong to any existing job. They
are left in the /var/spool/xerox/netqreq directory if the Printer
Controller crashes or is rebooted while clients are submitting jobs.
Remove orphan data files from the directory only if Xerox Client
Software is enabled. To remove these files:
Note: You may obtain the command tool from the background
menu, or you may use Wizard Mode.
1. At the PS-admin> prompt In the DocuPrint Print Service
window, enter stop queueing.
2. Obtain a command tool from the background menu.
3. Enter cd /var/spool/xerox/netqreq to access the netqreq
directory.
4. Enter ls -lt to display a list of files sorted by date.
5. Review the list to see if any source files (files that do not start
with "X") are dated earlier than the last reboot.
If such files exist, use the grep <sourcefilename> * command to
determine if they are orphan files. If this command does not
return any text, remove the files using the rm <sourcefilename>
command.
6. Enter exit if you are in Wizard Mode and return to the
Administrator level of commands.
7. Enter start queueing.
USING WIZARD MODE OR UNIX SHELL
12-5