Show PCL Parameters
XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Access level
Administrator
Syntax
Show PCL Parameters
Use the Show PCL Parameters command to display the current PCL
settings:
•
AutoCR: TRUE|FALSE
•
AutoLF: TRUE|FALSE
•
EdgeToEdge: TRUE|FALSE
•
EnvironmentSave: TRUE|FALSE
•
Language: <LANGUAGE>
•
SymbolSet: <value>
Note: Even though you can enter a symbol set value using
either kind1 or symbol set ID numbers, when you use Show PCL
Parameters, only the symbol set ID number is displayed.
Example
This example shows the usage of the Show PCL Parameters
command:
show pcl parameters
Ã
SETTING SYSTEM DEFAULTS
5-29