Xerox DocuPrint 180 Configuration Manual page 72

USING UTILITY COMMANDS
Package
xclient
xipp
system
Options
Printing Configuration Reports: Options 1 and 2
2-14
Table 2-3.
Parameter
xclient.enable
xipp.enable
ACOPaper
FontDisk
FormsDisk
HostName
IOT
IPAddress
MarketRegion
NetDevice
Netmask
PrinterName
ReservePagesDisk
SpoolDisk
TimeZone
The Configure utility provides the following options.
Options 1 and 2 print two different types of configuration reports:
•
Option 1: Prints a report of the routine installation questions,
with the answers given.
•
Option 2: Prints a report of all the configuration parameters
with their names and values.
The parameters are grouped by package (a package is a named
piece of the DocuPrint software). The parameters at the end of the
list are in a special category called System Parameters. These are
parameters of the entire system, such as the IOT type. Each
parameter in this report has a name (such as FontDisk or tcpip.ftp)
that you use if you want to change the value with Option 5. Each
XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Changeable parameters using Configure
Best
Option Purpose of Parameter
3 Enables use of the DocuPrint print client
3 Enables special XIPP prescan filter for use with
Xerox Documents on Demand (XDOD)
5 ACO market region can use either US or metric
sized paper
4 Places /imagerfonts on this disk number
4 Places /var/db/forms and the VIPP (XGF)
customer-installed files in /usr/xgf on this disk
number
4 TCP/IP hostname
4 4050, 4090, 4850, 4890, DP96, 4635, 4180,
92C (Changing this parameter is not
supported.)
4 IP Address of DocuPrint server
4 USCO, XCI, RX, or ACO
4 Ethernet=le0, le1, le2; Token Ring=tr0, tr1, tr2;
100MB Ethernet=hme0, hme1, hme2; Fiber
Optic FDDI=nf0, nf1, nf2
3 TCP/IP netmask
4 Default PrinterName
4 Places /var/db/reserve_pages on this disk
number
4 Places /var/spool on this disk number
4 Timezone from /usr/share/lib/zoneinfo