Xerox DocuPrint 180 Configuration Manual page 117

XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Help
Displays all available printing options and the information you
need to specify values. This command may scroll off the screen
when used in some telnet sessions. This is due to line wrap
caused by excessively long lines.
LocalConsoleHeight <number of lines>
Refers to the number of lines prior to "(More)" that display on the
Printer Controller. The default setting is "45," and the range of
allowable integer values is 20-100.
MagentaHighlight <RGB value for magenta>
Refers to the RGB value for magenta highlight color. The default
setting is "R: 0.8820001, G: 0.0, B: 0.8820001."
For magenta highlight color to print correctly, the default RGB
value for this option should not be modified.
MaxCopies <number of copies>
Refers to the maximum number of copies of a document that can
be printed. The default setting is "1,000."
MaxSecondsPerPage <seconds per page>
Refers to how long the Printer Controller is allowed to
decompose a page. The time is measured in CPU seconds, and
is approximate. This option only applies to PostScript jobs. The
default setting is "600."
MinDSC <version number>
Refers to the minimum acceptable DSC (PostScript Document
Structuring Convention) version. The default is 2.1.
NoSaveOutput <"TRUE" | "FALSE">
Refers to inhibiting paper output for Decomposition Service
forms creation. If true, trailer sheets will only be produced in the
event of any errors during decomposition. The default setting is
"FALSE."
OffsetPerCopy <"TRUE" | "FALSE">
Refers to whether the stacker offsets documents per copy when
the OffsetPerCopy attribute is not specified. The default setting
is "FALSE."
OffSetPerJob < "TRUE" | "FALSE">
Refers to controlling job offsetting. Selecting "FALSE" disables
job offsetting if the OffsetPerCopy option and attribute are also
False and if the OffsetPerCopy attribute is not set and the jobs
do not request offsetting.
OtherHighlight <RGB value for other highlight color>
Refers to the color for the other highlight. The default setting is
"R: 0.8820001, G: 0.0, B: 0.0."
PQAStacker <number>
Refers to the stacker group where PQA pages are delivered
(4850, 4890, and 92C only).
PrinterName <printer name>
Refers to the name of the printer.
SETTING SYSTEM DEFAULTS
5-13