System Specified Defaults - Xerox 6180N - Phaser Color Laser Printer Color Management Manual

Color Management Guide
A. System Specified defaults
This section details the various Color Management tools and
their system-specified, default states.
Color
Management
tool DC 2045/2060/6060
Color Mode 0 +/- 100
Lightness 0 +/- 100
Contrast 0 +/- 100
Color Cast:
• Cyan vs. • 0 +/- 100 (all Cyan
Red vs. all Red)
• Magenta • 0 +/- 100 (all
vs. Green Magenta vs. all
• Yellow vs. Green)
Blue • 0 +/- 100 (all Yellow
vs. all Blue)
Trapping Off
When enabled:
• height = 1
• width = 1
Image/Graphic Off
Trapping
Black Overprint Off
Anti-Aliasing Off
Source Color • RGB - sRGB
• CMYK - SWOP
Coated CMYK
• GRAY - DC2000
GRAY
Output Color- 200 dot
halftone
Table A-1.
0 +/- 100
0 +/- 100
0 +/- 100
• 0 +/- 100 (all Cyan
vs. all Red)
• 0 +/- 100 (all
Magenta vs. all
Green)
• 0 +/- 100 (all Yellow
vs. all Blue)
Off
When enabled:
• height = 1
• width = 1
Off
Off
Off
• RGB - sRGB
™
• CMYK - SWOP
Coated CMYK
• GRAY - iGen3 GRAY
175 dot
DC iGen3
™
A-1