Xerox DocuPrint 180 Configuration Manual page 188

CHECKING SYSTEM STATUS AND DISPLAYING BILLING METERS
PS-op>list volumes
Filesystem
/dev/dsk/c0t0d0s0
/dev/dsk/c0t0d0s6
/dev/dsk/c0t0d0s7
/dev/dsk/c0t0d0s5
Show Status
8-2
Example This example shows the information provided with the List Volumes
command:
kbytes
16231
135415
3547492
114847
Use the Show Status command to show the status of the printer.
Note: If multiple problems occur at the printer, the Show Status
command shows only the most recent system problem. You may
need to check other parts of the system after correcting the problem
displayed.
The user privilege mode shows less status information than the
operator mode.
Access level Administrator, operator, or user
Syntax Show Status
Arguments None
Example The following example shows the information provided by the Show
Status command. There are differences in the information provided
based on the printer model and configuration.
XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
used avail capacity
12621 1990
108626 3249
469542 2723210
80328 23039
Mounted on
87% /
90% /usr
15% /var
78% /opt