Link To Disable Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

Table 180 Link to Monitor Menu options
Command
addkey <1-65535>
remkey <1-65535>
cur

Link to Disable configuration

Command: /cfg/ufd/fdp/ltd
[Failure Link to Disable Menu]
The following table describes the Link to Disable (LtD) Menu options. The LtD can consist of any mix of
downlink ports (ports 1-16) and trunk groups that contain only downlink ports.
Table 181 Link to Disable Menu options
Command
addport <port number>
remport <port number>
addtrunk <1-12>
remtrunk <1-12>
addkey <1-65535>
remkey <1-65535>
cur
Description
Adds a LACP admin key to the LtM. LACP trunks formed with this admin
key will be included in the LtM.
Removes a LACP admin key from the LtM.
Displays the current LtM configuration.
addport - Add port to Link to Disable
remport - Remove port from Link to Disable
addtrnk - Add trunk to Link to Disable
remtrnk - Remove trunk from Link to Disable
addkey - Add adminkey to Link to Disable
remkey - Remove adminkey from Link to Disable
cur - Display current LtD configuration
Description
Adds a port to the current LtD group. Only downlink ports (1-16) are allowed
in the LtD.
Removes a port from the current LtD group.
Adds a trunk group to the current LtD group. LtD trunk groups can contain only
downlink ports (1-16).
Removes a trunk group from the current LtD group.
Adds a LACP admin key to the LtD. LACP trunks formed with this admin key will
be included in the LtD.
Removes a LACP admin key from the LtD.
Displays the current LtD configuration.
Configuration Menu
204