Port Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

Hp 10gb ethernet bl-c switch command reference guide
Hide thumbs Also See for 445860-B21 - 10Gb Ethernet BL-c Switch:
Table of Contents

Advertisement

Port configuration

Command: /cfg/port <port number>
[Port 1 Menu]
This menu enables you to configure settings for individual switch ports. This command is enabled by
default.
NOTE:
Port 17 is reserved for switch management.
The following table describes the Port Configuration Menu options.
Table 99
Port Configuration Menu options
Command
gig
aclqos
8021ppri
pvid <1-4094>
name <1-64
characters>|none
rmon enable|disable
tag enable|disable
tagpvid
enable|disable
brate <0-262143>|dis
mrate <0-262143>|dis
gig
- Gig Phy Menu
aclqos
- Acl/Qos Configuration Menu
8021ppri - Set default 802.1p priority
pvid
- Set default port VLAN id
name
- Set port name
rmon
- Enable/Disable RMON for port
tag
- Enable/disable VLAN tagging for port
tagpvid
- Enable/disable tagging on pvid
brate
- Set BroadCast Threshold
mrate
- Set MultiCast Threshold
drate
- Set Dest. Lookup Fail Threshold
ena
- Enable port
dis
- Disable port
cur
- Display current port configuration
Description
Displays the Gigabit Ethernet Physical Link Menu.
Displays the Access Control List (ACL)/Quality of Service (QoS) configuration menu.
Configures the port's 802.1p priority level.
Sets the default VLAN number which will be used to forward frames which are not
VLAN tagged. The default number is 1.
VLAN 4095 is reserved for switch management.
NOTE:
Sets a name for the port (maximum 64 characters). The assigned port name displays
next to the port number on some information and statistics screens.
Enables or disables Remote Monitoring for the port. RMON must be enabled for
any RMON configurations to function.
Disables or enables VLAN tagging for this port. It is disabled by default.
Disables or enables VLAN tag persistence. When disabled, the VLAN tag is
removed from packets whose VLAN tag matches the port PVID. The default value is
enabled.
Limits the number of broadcast packets per second to the specified value. If disabled
(dis), the port forwards all broadcast packets.
Limits the number of multicast packets per second to the specified value. If disabled
(dis), the port forwards all multicast packets.
Configuration Menu
134

Advertisement

Table of Contents
loading

Table of Contents