Vlan Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

Hp 10gb ethernet bl-c switch command reference guide
Hide thumbs Also See for 445860-B21 - 10Gb Ethernet BL-c Switch:
Table of Contents

Advertisement

VLAN configuration

Command: /cfg/l2/vlan <1-4094>
[VLAN 1 Menu]
The commands in this menu configure VLAN attributes, change the status of the VLAN, delete the VLAN,
and change the port membership of the VLAN.
By default, the VLAN menu option is disabled except VLAN 1, which is always enabled. The HP 10GbE
switch supports a maximum of 1,000 VLANs. VLAN 4095 is reserved for switch management.
NOTE:
See the HP 10Gb Ethernet BL-c Switch Application Guide for information on VLANs.
The following table describes the VLAN Configuration Menu options.
VLAN Configuration Menu options
Table 120
Command
name <1-32 characters>
stg <1-127>
add <port number>
rem <port number>
def <list of port numbers>
ena
dis
del
cur
IMPORTANT:
VLAN and which is not a member of any other VLAN is automatically added to default VLAN #1.
You cannot remove a port from VLAN #1 if the port has no membership in any other VLAN. Also,
you cannot add a port to more than one VLAN unless the port has VLAN tagging turned on. See the
tag command, in the "Port configuration" section earlier in this chapter.
name
- Set VLAN name
stg
- Assign VLAN to a Spanning Tree Group
add
- Add port to VLAN
rem
- Remove port from VLAN
def
- Define VLAN as list of ports
ena
- Enable VLAN
dis
- Disable VLAN
del
- Delete VLAN
cur
- Display current VLAN configuration
Description
Assigns a name to the VLAN or changes the existing name. The default
VLAN name is the first one.
Assigns a VLAN to a spanning tree group. If MSTP is used, the range
is 0-32 (0 = CIST).
Adds ports to the VLAN membership.
Removes ports from the VLAN membership.
Defines which ports are members of this VLAN. Every port must be a member
of at least one VLAN. By default, it defines ports to VLAN 1.
Enables this VLAN.
Disables this VLAN without removing it from the configuration.
Deletes this VLAN.
Displays the current VLAN configuration.
All ports must belong to at least one VLAN. Any port which is removed from a
Configuration Menu
156

Advertisement

Table of Contents
loading

Table of Contents