Accessing The Iscli - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual
Hp 10gb ethernet bl-c switch command reference guide
Hide thumbs
Also See for 445860-B21 - 10Gb Ethernet BL-c Switch:
- Reference manual (262 pages) ,
- User manual (60 pages) ,
- Application manual (198 pages)
Table of Contents
Advertisement
Accessing the ISCLI
To access the ISCLI, enter the following command from the AOS CLI, and reset the switch:
Boot Options# mode iscli
The default command-line interface for the HP 10GbE switch is the AOS CLI. To access the AOS CLI, enter
the following command and reset the switch:
>> Switch# boot cli-mode aos
Users can select the CLI mode upon login, if the /boot/prompt command is enabled. Only an
administrator connected through the console port can view and enable /boot/prompt. When
/boot/prompt is enabled, the first user to log in can select the CLI mode. Subsequent users must use the
selected CLI mode, until all users have logged out.
Boot Options Menu
213
Advertisement
Table of Contents
