802.1X Configuration; 802.1X Global Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

Hp 10gb ethernet bl-c switch command reference guide
Hide thumbs Also See for 445860-B21 - 10Gb Ethernet BL-c Switch:
Table of Contents

Advertisement

802.1x configuration

Command: /cfg/l2/8021x
[802.1x Configuration Menu]
This feature allows you to configure the HP 10GbE switch as an IEEE 802.1x Authenticator, to provide
port-based network access control. The following table describes the 802.1x Configuration Menu options.
802.1x Configuration Menu options
Table 103
Command
global
port <port number>
ena
dis
cur

802.1x Global configuration

Command: /cfg/l2/8021x/global
[802.1x Global Configuration Menu]
The global 802.1x menu allows you to configure parameters that affect all ports in the switch (except
management port 17). The following table describes the 802.1x Global Configuration Menu options.
802.1x Global Configuration Menu options
Table 104
Command
mode force-
unauth|auto|force-
auth
global
- Global 802.1x configuration menu
port
- Port 802.1x configuration menu
ena
- Enable 802.1x access control
dis
- Disable 802.1x access control
cur
- Show 802.1x configuration
mode
- Set access control mode
qtperiod - Set EAP-Request/Identity quiet time interval
txperiod - Set EAP-Request/Identity retransmission timeout
suptmout - Set EAP-Request retransmission timeout
svrtmout - Set server authentication request timeout
maxreq
- Set max number of EAP-Request retransmissions
raperiod - Set reauthentication time interval
reauth
- Set reauthentication status to on or off
default
- Restore default 802.1x configuration
cur
- Display current 802.1x configuration
Description
Sets the type of access control for all ports:
force-unauth - the port is unauthorized unconditionally.
auto - the port is unauthorized until it is successfully authorized by the RADIUS
server.
force-auth - the port is authorized unconditionally, allowing all traffic.
The default value is force-auth.
Description
Displays the global 802.1x Configuration Menu.
Displays the 802.1x Port Menu.
Globally enables 802.1x.
Globally disables 802.1x.
Displays current 802.1x parameters.
Configuration Menu
139

Advertisement

Table of Contents
loading

Table of Contents