Uplink Failure Detection Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

Table 177 Port Mirroring Configuration Menu options
Command
cur

Uplink Failure Detection configuration

Command: /cfg/ufd
[Uplink Failure Detection Menu]
Uplink Failure Detection (UFD) supports network fault tolerance in network adapter teams. Use this menu
to configure a Failure Detection Pair of one Links to Monitor (LtM) group and one Links to Disable (LtD)
group. When UFD is enabled and a Failure Detection Pair is configured, the switch automatically disables
ports in the LtD if it detects a failure in the LtM. The failure conditions which are monitored in the LtM
group include port link state moving to down, or port state moving to Blocking if Spanning Tree Protocol is
enabled.
The following table describes the Uplink Failure Detection (UFD) Configuration Menu options.
Table 178 Uplink Failure Detection Configuration Menu options
Command
fdp
on
off
cur
fdp - Failure Detection Pair Menu
on - Globally turn Uplink Failure Detection ON
off - Globally turn Uplink Failure Detection OFF
cur - Display current Uplink Failure Detection configuration
Description
Displays the Failure Detection Pair menu.
Globally turns Uplink Failure Detection ON.
Globally turns Uplink Failure Detection OFF.
Displays the current Uplink Failure Detection configuration parameters.
Description
Displays the current settings of the monitoring port.
Configuration Menu
202