Failure Detection Pair Configuration; Link To Monitor Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

Failure Detection Pair configuration

Command: /cfg/ufd/fdp
[FDP Menu]
Use these commands to configure a Failure Detection Pair, which consists of one Link to Monitor (LtM) and
one Link to Disable (LtD). When the switch detects a failure on the LtM, it automatically disables the ports
in the LtD.
The following table describes the Failure Detection Pair (FDP) Configuration Menu options.
Table 179 Failure Detection Pair Configuration Menu options
Command
ltm
ltd
ena
dis
current

Link to Monitor configuration

Command: /cfg/ufd/fdp/ltm
[Failure Link to Monitor Menu]
The following table describes the Link to Monitor (LtM) Menu options. The LtM can consist of only one
uplink port (ports 18-21) or a single trunk containing only uplink ports.
Link to Monitor Menu options
Table 180
Command
addport <port number>
remport <port number>
addtrnk <1-12>
remtrnk <1-12>
ltm - Link to Monitor Menu
ltd - Link to Disable Menu
ena - Enable FDP
dis - Disable FDP
current - Display current FDP configuration
Description
Displays the Links to Monitor menu.
Displays the Links to Disable menu.
Enables the FDP Parameters.
Disables the FDP Parameters.
Displays the current FDP configuration.
addport - Add port to Link to Monitor
remport - Remove port from Link to Monitor
addtrnk - Add trunk to Link to Monitor
remtrnk - Remove trunk from Link to Monitor
addkey - Add adminkey to Link to Monitor
remkey - Remove adminkey from Link to Monitor
cur - Display current LtM configuration
Description
Adds a port to the LtM. Only uplink ports (18-21) are allowed in the LtM.
Removes a port from the LtM.
Adds a trunk group to the LtM. The LtM trunk group can contain only
uplink ports (18-21).
Removes a trunk group from the LtM.
Configuration Menu
203