Configuration Menu; Introduction; Menu Information - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

Configuration Menu

Introduction

The Configuration Menu is only available from an administrator login. It includes submenus for
configuring every aspect of the switch. Changes to configuration are not active until explicitly applied.
Changes can be saved to non-volatile memory (NVRAM).

Menu information

Command: /cfg
[Configuration Menu]
The following table describes the Configuration Menu options.
Configuration Menu options
Table 77
Command
sys
port <port number>
l2
l3
qos
acl
rmon
pmirr
ufd
dump
ptcfg <host name or IP address of
FTP/TFTP server> <filename on host>
sys - System-wide Parameter Menu
port - Port Menu
l2 - Layer 2 Menu
l3 - Layer 3 Menu
qos - QOS Menu
acl - Access Control List Menu
rmon - RMON Menu
pmirr - Port Mirroring Menu
ufd - Uplink Failure Detection Menu
dump - Dump current configuration to script file
ptcfg - Backup current configuration to FTP/TFTP server
gtcfg - Restore current configuration from FTP/TFTP server
cur - Display current configuration
Usage
Displays the System Configuration Menu.
Displays the Port Configuration Menu.
Displays the Layer 2 Configuration Menu.
Displays the Layer 3 Configuration Menu.
Displays the Quality of Service Configuration Menu.
Displays the Access Control List Configuration Menu.
Displays the RMON Configuration Menu.
Displays the Mirroring Configuration Menu.
Displays the Uplink Failure Detection Configuration Menu.
Dumps current configuration to a script file.
Backs up current configuration to FTP/TFTP server.
Configuration Menu
110