Maintenance Menu; Introduction; Menu Information - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

Maintenance Menu

Introduction

The Maintenance Menu is used for debugging purposes, enabling you to generate a technical support
dump of the critical state information in the switch, and to clear entries in the Forwarding Database and
the Address Resolution Protocol (ARP) and routing tables. This menu is available only from an
administrator and operator login.

Menu information

Command: /maint
[Maintenance Menu]
Dump information contains internal switch state data that is written to flash memory on the switch after
any one of the following occurs:
The switch administrator forces a switch panic. The panic option, found in the Maintenance Menu,
causes the switch to dump state information to flash memory, and then causes the switch to reboot.
The switch administrator enters the switch reset key combination (Ctrl-Shift-6) on a device that is
attached to the console port.
The switch detects a hardware or software problem that requires a reboot.
The following table describes the Maintenance Menu options.
Table 186 Maintenance Menu options
Command
sys
fdb
debug
arp
route
sys - System Maintenance Menu
fdb - Forwarding Database Manipulation Menu
debug - Debugging Menu
arp - ARP Cache Manipulation Menu
route - IP Route Manipulation Menu
igmp - IGMP Multicast Group Menu
uudmp - Uuencode FLASH dump
ptdmp - Upload FLASH dump via FTP/TFTP
ptfile - Upload FLASH dump via FTP/TFTP
cldmp - Clear FLASH dump
panic - Dump state information to FLASH and reboot
tsdmp - Tech support dump
pttsdmp - Upload tech support dump via FTP/TFTP
Usage
Displays the System Maintenance Menu.
Displays the Forwarding Database Manipulation Menu.
Displays the Debug Menu.
Displays the ARP Cache Manipulation Menu.
Displays the IP Route Manipulation Menu.
Maintenance Menu
214