Ip Information; Igmp Multicast Group Information - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

IP information

Command: /info/l3/ip
IP information:
Interface information:
1: 10.80.23.243
250: 10.20.7.144
Default gateway information: metric strict
1: 10.80.22.1,
254: 10.20.1.1,
Current BOOTP relay settings: OFF
0.0.0.0, 0.0.0.0
Current IP forwarding settings: OFF, dirbr disabled
Current network filter settings:
none
Current route map settings:
The following interface and default gateway information is displayed:
Interface number
IP address
IP mask
IP broadcast address
Operational status
BootP relay settings
IP forwarding settings
Network filter settings
Route map settings

IGMP multicast group information

Command: /info/l3/igmp
[IGMP Multicast Group Menu]
The following table describes the commands used to display information about IGMP groups learned by
the switch.
IGMP Multicast Group menu options
Table 35
Command
255.255.254.0
255.255.0.0
vlan any,
vlan 4095, up
mrouter - Show IGMP Snooping Multicast Router Port information
find - Show a single group by IP group address
vlan - Show groups on a single vlan
port - Show groups on a single port
trunk - Show groups on a single trunk
detail - Show detail of a single group by IP group address
dump - Show all groups
Usage
10.80.23.255,
10.20.255.255,
up active
active
Information Menu
vlan 1, up
vlan 4095, up
62