User Security Model Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

The following table describes the SNMPv3 Configuration Menu options.
SNMPv3 Configuration Menu options
Table 85
Command
usm <1-16>
view <1-128>
access <1-32>
group <1-16>
comm <1-16>
taddr <1-16>
tparam <1-16>
notify <1-16>
v1v2 disable|enable
cur

User Security Model configuration

Command: /cfg/sys/ssnmp/snmpv3/usm
[SNMPv3 usmUser 1
You can make use of a defined set of user identities using this Security Model. An SNMP engine must
have the knowledge of applicable attributes of a user.
This menu helps you create a user security model entry for an authorized user. You need to provide a
security name to create the USM entry.
Description
Configures a user security model (USM) entry for an authorized user. You can also
configure this entry through SNMP. The range is 1-16.
Configures different MIB views. The range is 1-128.
Configures access rights. The View-based Access Control Model defines a set of
services that an application can use for checking access rights of the user. You need
access control when you have to process retrieval or modification request from an
SNMP entity. The range is 1-32.
Configures an SNMP group. A group maps the user name to the access group names
and their access rights needed to access SNMP management objects. A group defines
the access rights assigned to all names that belong to a particular group. The range is
1-16.
Configures a community table entry. The community table contains objects for
mapping community strings and version-independent SNMP message parameters. The
range is 1-16.
Configures the destination address and user security levels for outgoing notifications.
This is also called the transport endpoint. The range is 1-16.
Configures SNMP parameters, consisting of message processing model, security
model, security level, and security name information. There may be multiple transport
endpoints associated with a particular set of SNMP parameters, or a particular
transport endpoint may be associated with several sets of SNMP parameters.
Configures a notification index. A notification application typically monitors a system
for particular events or conditions, and generates Notification-Class messages based
on these events or conditions. The range is 1-16.
Enables or disables the access to SNMP version 1 and version 2. This command is
enabled by default.
Displays the current SNMPv3 configuration.
Menu]
name - Set USM user name
auth - Set authentication protocol
authpw - Set authentication password
priv - Set privacy protocol
privpw - Set privacy password
del - Delete usmUser entry
cur - Display current usmUser configuration
Configuration Menu
123