Secure Shell Server Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

Secure Shell Server configuration

Command: /cfg/sys/sshd
[SSHD Menu]
Telnet traffic on the network is not secure. This menu enables Secure Shell (SSH) access from any SSH
client. The SSH program securely logs into another computer over a network and executes commands in a
secure environment. All data using SSH is encrypted.
NOTE:
See the HP 10Gb Ethernet BL-c Switch Application Guide for information on SSH.
The following table describes the SSHD Configuration Menu options.
SSHD Configuration Menu options
Table 80
Command
intrval <0-24>
scpadm
hkeygen
skeygen
sshport <TCP port number>
ena
dis
on
interval– Set Interval for generating the RSA server key
scpadm – Set SCP-only admin password
hkeygen - Generate the RSA host key
skeygen - Generate the RSA server key
sshport - Set SSH server port number
ena - Enable the SCP apply and save
dis - Disable the SCP apply and save
on - Turn SSH server ON
off - Turn SSH server OFF
cur - Display current SSH server configuration
Description
Defines interval for auto-generating the RSA server key. The switch will auto-
generate the RSA server key at the interval defined in this command. The value
of zero (0) means the RSA server key auto-generation is disabled. If the switch
has been busy performing any other key generation and the assigned time of
interval expires, the RSA server will skip generating the key.
Defines the administrator password that is for Secure Copy (SCP) only. The
username for this SCP administrator is scpadmin.
Typically, SCP is used to copy files securely from one machine to another. In
the switch, SCP is used to download and upload the switch configuration using
secure channels.
Generates the RSA host keys manually. The switch creates this key
automatically while configuring the switch with Secure Shell (SSH). But you can
generate the key manually by using this command if you need to overwrite the
key for security reasons. The command will take effect immediately without
executing the apply command.
Generates the RSA server key. The switch creates this key automatically while
configuring the switch with Secure Shell (SSH). You can generate the key
manually by using this command if you need to overwrite the key for security
reasons. The command will take effect immediately without executing the apply
command.
Sets the SSH server port number.
Enables the SCP apply and save.
Disables the SCP apply and save. This is the default for SCP.
Enables the SSH server.
Configuration Menu
116