User Access Control Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

User Access Control configuration

Command: /cfg/sys/access/user
[User Access Control Menu]
The following table describes the User Access Control menu options.
Table 96 User Access Control Configuration menu options
Command
uid <1-10>
eject <username>
usrpw <1-128 characters> Sets the user (user) password (maximum 128 characters). The user has no direct
opw <1-128 characters>
admpw <1-128 characters> Sets the administrator (admin) password (maximum 128 characters). The super
cur
uid - User ID Menu
eject - Eject user
usrpw - Set user password (user)
opw - Set operator password (oper)
admpw - Set administrator password (admin)
cur - Display current user status
Description
Displays the User ID Menu for the selected user.
Ejects the selected user from the switch.
responsibility for switch management. He or she can view switch status
information and statistics, but cannot make any configuration changes.
Sets the operator (oper) password (maximum 128 characters). The operator
manages all functions of the switch. He or she can view all switch information
and statistics and can reset ports or the entire switch.
user administrator has complete access to all menus, information, and
configuration commands on the switch, including the ability to change both the
user and administrator passwords.
Displays the current user status.
Configuration Menu
131