Information Menu; Introduction; Menu Overview - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

Information Menu

Introduction

You can view configuration information for the switch in the user, operator, and administrator command
modes. This chapter discusses how to use the CLI to display switch information.

Menu overview

Command: /info
[Information Menu]
The following table describes the Information Menu options.
Information Menu options
Table 6
Command
sys
l2
l3
qos
acl
rmon
link
sys - System Information Menu
l2 - Layer 2 Information Menu
l3 - Layer 3 Information Menu
qos - QoS Menu
acl - Show ACL information
rmon - Show RMON information
link - Show link status
port - Show port information
geaport - Show system port and gea port mapping
sfp - Show External Port SFP/XFP status
ufd - Show Uplink Failure Detection information
dump - Dump all information
Usage
Displays system information.
Displays the Layer 2 Information Menu.
Displays the Layer 3 Information Menu.
Displays the Quality of Service (QoS) Information Menu.
Displays the Access Control List Information Menu.
Displays the Remote Monitoring Information Menu.
Displays configuration information about each port, including:
Port number
Port speed (10 Mb/s, 100 Mb/s, 1000 Mb/s, or any)
Duplex mode (half, full, or any)
Flow control for transmit and receive (no, yes, or any)
Link status (up or down)
Information Menu
25