Table 33
OSPF Database information
Command
rtr <adv-rtr (A.B.C.D)>|
<link_state_id (A.B.C.D)>|<self>
self
summ <adv-rtr (A.B.C.D)>|
<link_state_id (A.B.C.D)>|<self>
all
OSPF route codes information
Command: /info/l3/ospf/routes
Codes: IA - OSPF inter area,
* - best
IA 10.10.0.0/16 via 200.1.1.2
IA 40.1.1.0/28 via 20.1.1.2
IA 80.1.1.0/24 via 200.1.1.2
IA 100.1.1.0/24 via 20.1.1.2
IA 140.1.1.0/27 via 20.1.1.2
IA 150.1.1.0/28 via 200.1.1.2
E2 172.18.1.1/32 via 30.1.1.2
E2 172.18.1.2/32 via 30.1.1.2
E2 172.18.1.3/32 via 30.1.1.2
E2 172.18.1.4/32 via 30.1.1.2
E2 172.18.1.5/32 via 30.1.1.2
E2 172.18.1.6/32 via 30.1.1.2
E2 172.18.1.7/32 via 30.1.1.2
E2 172.18.1.8/32 via 30.1.1.2
Routing Information Protocol information
Command: /info/l3/rip
[RIP Information Menu]
The following table describes the Routing Information Protocol information menu options.
RIP information
Table 34
Command
routes
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
routes
- Show RIP routes
dump
- Show RIP user's configuration
Usage
Displays information about RIP routes.
Usage
Displays the router (type 1) LSAs with detailed information of each
field of the LSAs. The usage of this command is the same as the
usage of the command asbrsum.
Displays all the self-advertised LSAs. No parameters are required.
Displays the network summary (type 3) LSAs with detailed
information of each field of the LSAs.
The usage of this command is the same as the usage of the
command asbrsum.
Displays all the LSAs.
Information Menu
60