System Host Log Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

Table 78 System Configuration Menu options
Command
dlight enable|disable
idle <1-60>
notice <1-1024 character
multi-line> <'-' to end>
bannr <1-80 characters>
hprompt disable|enable
bootp disable|enable
dhcp disable|enable
reminders disable|enable
cur

System host log configuration

Command: /cfg/sys/syslog
[Syslog Menu]
Usage
Enables or disables daylight savings time in the system clock. When enabled,
the switch adds an extra hour to the system clock so that it is consistent with the
local clock. The default setting is disabled.
Sets the idle timeout for CLI sessions, from 1 to 60 minutes. The default value is
5 minutes.
This setting affects both the console port and Telnet port.
Displays login notice immediately before the Enter password: prompt. This
notice can contain up to 1024 characters and new lines.
Configures a login banner of up to 80 characters. When a user or
administrator logs into the switch, the login banner is displayed. It is also
displayed as part of the output from the /info/sys/gen command.
Enables or disables displaying of the host name (system administrator's name)
in the command line interface.
Enables or disables the use of BOOTP. If you enable BOOTP, the switch will
query its BOOTP server for all of the switch IP parameters. The default value is
enabled.
Enables or disables Dynamic Host Control Protocol for setting the
management IP address on interface 250. When enabled, the IP
address obtained from the DHCP server overrides the static IP address.
The default value is enabled.
Enables or disables reminder messages in the CLI. The default value is
enabled.
Displays the current system parameters.
host - Set IP address of first syslog host
host2 - Set IP address of second syslog host
sever - Set the severity of first syslog host
sever2 - Set the severity of second syslog host
facil - Set facility of first syslog host
facil2 - Set facility of second syslog host
console - Enable/disable console output of syslog messages
log - Enable/disable syslogging of features
cur - Display current syslog settings
Configuration Menu
114