Igmp Filter Definition; Igmp Filtering Port Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

IGMP filter definition

Command: /cfg/l3/igmp/igmpflt/filter <1-16>
[IGMP Filter 1 Definition Menu]
range - Set IP Multicast address range
action - Set filter action
ena - Enable filter
dis - Disable filter
del - Delete filter
cur - Display current IGMP filter configuration
The following table describes the IGMP Filter Definition Menu options.
IGMP Filter Definition Menu options
Table 147
Command
range <IP multicast address>
<IP multicast address>
action allow|deny
ena
dis
del
cur

IGMP filtering port configuration

Command: /cfg/l3/igmp/igmpflt/port <port number>
[IGMP Port 20 Menu]
filt - Enable/disable IGMP Filtering on port
add - Add IGMP filter to port
rem - Remove IGMP filter from port
cur - Display current IGMP Filtering Port configuration
The following table describes the IGMP Port Filtering Configuration Menu options.
Table 148 IGMP Filtering Port Menu options
Command
filt enable|disable
add <1-16>
rem <1-16>
cur
Description
Configures the range of IP multicast addresses for this filter. Enter the first IP
multicast address of the ranger, followed by the second IP multicast
address of the range.
Allows or denies multicast traffic for the IP multicast addresses specified.
Enables this IGMP filter.
Disables this IGMP filter.
Deletes this filter's parameter definitions.
Displays the current IGMP filter.
Description
Enables or disables IGMP Filtering on this port.
Adds an IGMP filter to this port.
Removes an IGMP filter from this port.
Displays the current IGMP filter parameters for this port.
Configuration Menu
177