System Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

System configuration

Command: /cfg/sys
[System Menu]
This menu provides configuration of switch management parameters such as user and administrator
privilege mode passwords, browser-based management settings, and management access list.
The following table describes the System Configuration Menu options.
Table 78 System Configuration Menu options
Command
syslog
sshd
radius
tacacs+
ntp
ssnmp
access
date
time
timezone
olddst
syslog - Syslog Menu
sshd - SSH Server Menu
radius - RADIUS Authentication Menu
tacacs+ - TACACS+ Authentication Menu
ntp - NTP Server Menu
ssnmp - System SNMP Menu
access - System Access Menu
date - Set system date
time - Set system time
timezone - Set system timezone (daylight savings)
olddst - Set system DST for US
dlight - Set system daylight savings
idle - Set timeout for idle CLI sessions
notice - Set login notice
bannr - Set login banner
hprompt - Enable/disable display hostname (sysName) in CLI prompt
bootp - Enable/disable use of BOOTP
dhcp - Enable/disable use of DHCP on Mgmt interface
reminders - Enable/disable Reminders
cur - Display current system-wide parameters
Usage
Displays the Syslog Menu.
Displays the SSH Server Menu.
Displays the RADIUS Authentication Menu.
Displays the TACACS+ Menu.
Displays the Network Time Protocol (NTP) Server Menu.
Displays the System SNMP Menu.
Displays the System Access Menu.
Prompts the user for the system date.
Configures the system time using a 24-hour clock format.
Configures the time zone where the switch resides. You are prompted to select
your location (continent, country, region) by the timezone wizard. Once a
region is selected, the switch updates the time to reflect local changes to
Daylight Savings Time, etc.
Enables or disables use of the Daylight Saving Time (DST) rules in effect prior
to the year 2007. The default value is disabled.
Configuration Menu
113