Activating Appletalk On The Printer - Canon iPF655 - imagePROGRAF Color Inkjet Printer User Manual

Network Setting (Mac OS X)
Conguring the Destination for AppleTalk Networks
(Macintosh)
To print over an AppleTalk network, activate the AppleTalk protocol and congure the destination as follows.

Activating AppleTalk on the printer

Important
•
By factory default, the AppleTalk protocol is disabled on the printer.
1.
On the Tab Selection screen of the Control Panel, press ◄ or ► to select the Settings/Adj.
tab ( ).
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
2.
Press the OK button.
The Set./Adj. Menu is displayed.
3.
Press ▲ or ▼ to select Interface Setup, and then press the OK button.
4.
Press ▲ or ▼ to select AppleTalk, and then press the OK button.
5.
Press ▲ or ▼ to select On, and then press the OK button.
6.
Press the Menu button.
If any of the settings is changed, a conrmation message is displayed. In this case, press
the OK button.
Important
•
Be sure to complete step 6. This will activate the values you have entered.
Note
•
By using RemoteUI, you can also specify the object name used for AppleTalk, as well as the printer
zone name.
For details on RemoteUI, see "Using RemoteUI". (→P.571)
600 Network Setting