Table of Contents
Advertisement
Rear Panel
Figure 55 describes the features of the rear panel of the EXPRESS5800/140Rc-4 server platform.
A
Power supply AC inlet 1
B
Power supply AC inlet 2
C
Optional ICMB ports 1 (left) and 2 (right)
D
Hot-plug PCI LEDs
E
Hot-plug 64-bit, 100-MHz PCI-X add-in card slots
F
Non-hot-plug 64-bit, 100-MHz PCI-X add-in card slots
G
Non-hot-plug 32-bit, 33-MHz PCI add-in card slots
H
Available VHDCI SCSI connector from accessory kit
I
Available serial port B from accessory kit
Peripheral Device Bay
Opening the right bezel door provides access to the peripheral bay. The peripheral bay consists of
two bays for removable media:
•
The configurable media bay comes with a combination slimline 3.5-inch diskette drive and
slimline CD-ROM drive installed.
•
The half-height media bay accommodates a 5.25-inch drive, such as a DAT drive.
CAUTION
NEC does not recommend installing a hard disk drive in the 5.25-inch bay,
because of potential cooling and electromagnetic interference (EMI)
constraints.
Server Description
Figure 55. EXPRESS5800/140Rc-4 Rear Panel View
J
LAN2 Gbit port
K
USB ports 0 (upper) and 1 (lower)
L
LAN1 100/10 RJ45 connector
M
Video connector
N
Serial port A
†
O
PS/2
-compatible mouse port
P
PS/2-compatible keyboard port
Q
Chassis ID LED
R
IEEE-1284 Enhanced Parallel Port
107
Advertisement
Table of Contents
