5 Installing and Removing Components
Tools and Supplies Needed
•
†
Phillips
screwdriver
•
Small flat-bladed screwdriver
•
Antistatic wrist strap and conductive foam pad (recommended)
•
Pen or pencil
•
Equipment log (page 131)
As you integrate new parts into the system, record the model and serial number of the server system,
all installed options, and any other pertinent information specific to the server system.
Access Covers
This section includes instructions for the following:
•
Removing and installing the bezel
•
Removing and installing the rear access cover
•
Removing and installing the front access cover
Installing and Removing Components
27