Intel SRSH4 - Server Platform - 0 MB RAM Service Manual page 97

Error
Error message
code
0BD9 4th SMBus address not acknowledged.
0BDA 4th SMBus device Error detected.
0BDB 4th SMBus timeout.
0BDC 5th SMBus address not acknowledged.
0BDD 5th SMBus device Error detected.
0BDE 5th SMBus timeout.
0BE8 IPMB address not acknowledged.
0BE9 IPMB device Error detected.
0BEA IPMB timeout.
8120 Unsupported DIMM detected in DIMM group
#1.
8121 Unsupported DIMM detected in DIMM group
#2.
8122 Unsupported DIMM detected in DIMM group
#3.
8130 Mismatch DIMM detected in DIMM group #1.
8131 Mismatch DIMM detected in DIMM group #2.
8132 Mismatch DIMM detected in DIMM group #3.
8140 DIMM group #1 with error is enabled.
8141 DIMM group #2 with error is enabled.
8142 DIMM group #3 with error is enabled.
8150 NVRAM Cleared By Jumper.
8151 Password Cleared By Jumper.
8160 Mismatch Processor Speed detected on
Processor 1.
8161 Mismatch Processor Speed detected on
Processor 2.
8162 Mismatch Processor Speed detected on
Processor 3.
8163 Mismatch Processor Speed detected on
Processor 4.
8170 Processor 1 not operating at intended
frequency
8171 Processor 2 not operating at intended
frequency
8172 Processor 3 not operating at intended
frequency
8173 Processor 4 not operating at intended
frequency
817F All processors not operating at intended
frequency
8200 Online Spare Memory was not ready.
Solving Problems
Recommended Action
Contact your service representative to
replace the board specified in the system
event log.
Contact your service representative.
Contact your service representative to
replace the four DIMMs in the relevant
group.
See the labels put on the DIMMs to make
sure that the DIMMs of the same type are
installed in groups. If DIMMs of different
types are installed in one or more groups,
contact the service representative to replace
DIMMs properly.
Contact your service representative to
replace the four DIMMs in the relevant
group.
Turn off the power. Then recover the
jumper setting to the original setting.
Check the frequency of the CPU. If it is
unknown, contact your service
representative.
DIMM type mismatch is ditected when the
online spare memory feature is enabled.
Contact your service representative.
97