Figure 15. Raising The Locking Bar; Figure 16. Installing Processors - Intel SRSH4 - Server Platform - 0 MB RAM Service Manual

2. Raise the locking bar on the socket.
3. Orient the processor so that the triangle on the corner of the processor aligns with the triangle on
the corner of the socket (Figure 16).
4. Aligning the pins of the processor with the socket, insert the processor into the socket. The
processor should drop into the socket without requiring any force.
5. Lower the locking bar completely.
Installing and Removing Components

Figure 15. Raising the Locking Bar

Figure 16. Installing Processors

OK NG
43