Installing the Front Access Cover
NOTE
Before installing the front access cover, check that you have not left tools or
loose parts inside the system.
To install the front access cover:
1. Position the cover on the chassis so that the cover tabs align with the chassis slots.
2. While lightly pressing down on the cover, slide it toward the rear of the chassis until the cover
tabs fully engage the chassis slots.
3. Attach the cover to the chassis with the three screws removed earlier.
Accessing the System Boards
This section includes instructions for the following:
•
Removing and installing the access cover to the system boards
•
Removing and installing the memory board
•
Removing and installing the processor board air baffle
•
Removing and installing the processor board
•
Removing and installing the baseboard
Installing and Removing Components
31