Hard Disk Drive Lamp (Disk Lamp) - Intel SRSH4 - Server Platform - 0 MB RAM Service Manual

Hard Disk Drive Lamp (DISK Lamp)

The disk lamp on the 3.5-inch disk bay has different meanings depending on the display status.
10. Lighting green
The hard disk is installed and powered on.
11. Blinking green
Indicates that the hard disk is accessed.
12. Lighting amber
Indicates that the installed hard disk is defected in the disk array configuration.
NOTE:
While hard disks are in the disk array configuration (RAID1/RAID5 or
RAID0+1), a single failed hard disk does not affect the operation of the server.
However, it is recommended to replace the failed hard disk and auto-rebuild
(reconfigure) the hard disks as soon as possible. (You can hot-swap such a failed hard
disk.)
13. Alternate lighting green or amber
Indicates that the hard disk is being rebuilt (this status is not a failure). If the defected hard disk is
replaced with a new one in the disk array configuration, the data is automatically rebuilt (auto rebuild
function). During the rebuild operation, the lamp is lit green or amber alternatively.
The lamp goes off when the rebuild is terminated normally. The lamp goes on amber if the rebuild fails.
Server Description
DISK lamps
123