Network Statistics; Tcp/Ip Protocol Information - HP Jetdirect 310x - Print Server For Fast Ethernet User Manual

Back to Top

Network Statistics

Provides the current values for various network parameters monitored by the print server.
Message
Total number of frames (packets) received by the print server without error.
Total
This includes broadcast, multicast packets, and packets specifically
Packets
addressed to the print server. This number does not include packets
Received
specifically addressed to other nodes.
Number of frames specifically addressed to this print server. This does not
Unicast
include broadcasts or multicasts.
Packets
Received
Total number of frames (packets) received with errors by the print server.
Bad Packets
Received
Maximum of CRC (Cyclic Redundancy Check) errors and framing errors.
Framing
CRC errors are frames received with CRC errors. Framing errors are frames
Errors
received with alignment errors. A large number of framing errors could
Received
indicate a cabling problem with your network.
Total number of frames (packets) transmitted without error.
Total
Packets
Transmitted
Total number of frames (packets) not successfully transmitted because of
Unsendable
errors.
Packets
Number of frames not transmitted because of repeated collisions.
Transmit
Collisions
Total number of frames not transmitted because a late collision occurred. A
Transmit
large number may indicate a cabling problem on the network.
Late
Collisions
Back to Top

TCP/IP Protocol Information

Provides the current status and parameter values for the TCP/IP network protocols.
Message
Current TCP status:
Status
An error code and message
Ready the print server is awaiting data over TCP/IP.
Disabled TCP/IP was manually disabled.
Initializing the print server is searching for the BOOTP server,
or trying to get the configuration file through TFTP. An additional
status message may also be displayed.
are displayed if the print server is not ready.
Description
Description