Specifying Configuration Information; Accepting The Installation Settings - Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual

5 (Conditional) If the prompt for Automatic Changes displays, click Continue.
6 (Conditional) If prompted, resolve any dependency conflicts.

Accepting the Installation Settings

1 Review the final Installation Summary page to ensure that you have all the Installation settings
you desire.
2 After you have changed all the Installation Settings as desired, click Accept.
3 On the Confirm Installation page, click Install.
The base installation settings are applied and the packages are installed.
4 For installations using a network installation source, you can remove the network boot CD
(SLES 10 SP3 CD 1) from the CD drive.
5 For installations using a CD or DVD installation source, leave the CD or DVD in the CD-ROM
or DVD drive.
6 After the server reboot, proceed with

3.3.6 Specifying Configuration Information

When the server reboots, you are required to complete the following configuration information:
1. "Specifying the Password for the System Administrator "root"" on page 54
2. "Specifying Network Configuration Settings" on page 55
3. "Testing the Connection to the Internet" on page 57
4. "Specifying Novell Customer Center Configuration Settings" on page 57
5. "Updating the Server Software During the Installation" on page 60
6. "Specifying Service Configuration Settings" on page 63
7. "Specifying LDAP Configuration Settings" on page 64
8. "Specifying eDirectory Configuration Settings" on page 66
9. "Configuring Novell Open Enterprise Server Services" on page 71
Specifying the Password for the System Administrator "root"
In the Password for the System Administrator root page:
1 Specify the password for the
For security reasons, the
long and should contain a mixture of both uppercase and lowercase letters and numbers. The
maximum length for passwords is 72 characters, and passwords are case sensitive. If you have
a password longer than eight characters, click Expert Options > Blowfish > OK.
2 Confirm the password.
3 Click Next.
54 OES 2 SP2: Installation Guide
"Specifying Configuration Information" on page
administrator.
root
user's password should be between five and eight characters
root
54.