Making Copies Of The Downloaded Bundles; Section D.3, "Making Copies Of The Downloaded Bundles - Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual

Replace/Remove
<Target> </Target>
IMPORTANT: These customizations are required for the mirror operation to succeed.
Experienced administrators might want to make further modifications to the
file, but such modifications should be confined to those fields that have no values
conf.xml
specified. For information on customizing the file, see the information in
and "zlmmirror (1)" in the
3 If the
zlm-mirror-conf.xml
choosing on the ZENworks Linux Management server, for example
4 As the user at a terminal prompt, change to the directory containing the
root
file and enter the following command:
conf.xml
zlmmirror m -c zlm-mirror-conf.xml -v --force-nevra
The files start downloading to the server. Depending on your download speed, the mirror
operation could take a few hours to complete.
5 When the mirror operation finishes and the terminal prompt reappears in your terminal, verify
that there were no errors, then continue with
Bundles," on page 229.
If there were errors, such as those resulting from connection problems, repeat from
all of the packages have been downloaded successfully.
6 Continue with "Making Copies of the Downloaded
D.3 Making Copies of the Downloaded Bundles
Because of your investment in downloading the OES 2 SP2 packages, we recommend that you
create a backup copy of the downloaded bundles in a new folder. This avoids needing to download
the bundles again if they are inadvertently compromised in some way.
1 From a supported browser (http://www.novell.com/documentation/zlm73/lm7install/data/
bx8v5qz.html), log into
zlm73/lm7admin/data/bxldlef.html).
2 Click Bundles.
3 Click the first bundle: OES2-SP2-Online.
4 In the left column of the bundle list, click the box for OES2-SP2-Online-bundle.
5 Click Edit > Copy > OK.
A bundle named Copy of OES2-SP2-Online-bundle is created and listed.
6 Repeat from Step 2
OES2-SP2-Pool
SLES10-SP3-Online
SLES10-SP3-Pool
7 Continue with "Creating a Password Answer
With
The two <Target>...</Target> entries in each section indicate that both
the i586 (32-bit) and x86_64 (64-bit) patches are needed. If you have
only one architecture type deployed, you can remove the entry for the
architecture you don't use.
Novell ZENworks 7.3 Linux Management Administration
file is on your workstation, copy it to a directory of your
ZENworks Control Center (http://www.novell.com/documentation/
for the other three bundles:
Upgrading to OES 2 SP2 Through a ZENworks Linux Management Server 229
/root/zlm_conf_files
Section D.3, "Making Copies of the Downloaded
Bundles."
File."
zlm-mirror-
"Mirroring Software"
Guide.
.
zlm-mirror-
Step 4 until