Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual page 181

NOTE: Detailed explanations of the Summary page settings are available in
Configuration Options and Settings (http://www.novell.com/documentation/sles10/
book_virtualization_xen/data/cha_xen_config_options.html)"in the
(http://www.novell.com/documentation/sles10/book_virtualization_xen/data/
book_virtualization_xen.html)
5 Click Name of Virtual Machine.
6 Specify a name for the virtual machine in the Name field, then click Apply.
For example, you might specify hostname_vm, where hostname is the DNS name of the server
you are installing in the VM.
7 Click Hardware.
7a Specify the amount of initial and maximum memory for the virtual machine to consume
from the available memory. The initial memory should not be less than 1024 MB.
7b Specify the number of processors that you want the virtual machine to use.
7c Click Apply.
8 If you want to change the graphics adapter settings, click Graphics and select the type of
graphic support desired, then click Apply.
9 Click Disks.
The Virtual Disk page lets you create the virtual disks that the OES 2 SP2 VM guest will have
access to. This includes the installation media if you are installing from downloaded SLES and
OES ISO image files.
guide.
Installing, Upgrading, or Updating OES on a Xen-based VM 181
"Virtualization:
Virtualization with Xen