Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual page 58

To register the server during the installation:
1 On the Novell Customer Center Configuration configuration page, select all of the following
options, then click Next.
Option
Configure Now
Hardware Profile
Optional Information
Registration Code
Regularly Synchronize
with the Customer
Center
2 After you click Next, the following message is displayed.
Wait until this message disappears and the Manual Interaction Required page displays.
3 On the Manual Interaction Required page, note the information that you will be required to
specify, then click Continue.
4 On the Novell Customer Center Registration page, specify the required information in the
following fields, then click Submit:
Field
Email Address
Confirm Email Address The same e-mail address for your Novell Login account
Activation Code for
SLES Components
(optional):
Activation Code for
OES Components
(optional):
System Name or
Description (optional):
58 OES 2 SP2: Installation Guide
What it Does
Proceeds with registering this server and the SLES 10 SP3 and OES 2
SP2 product in the Novell Customer center.
Sends the information to the Novell Customer Center about the hardware
that you are installing SLES 10 SP3 and OES 2 SP2 on.
Sends optional information to the Novell Customer Center for your
registration. For this release, this option doesn't send any additional
information.
Makes the registration with activation codes mandatory.
Keeps the installation sources for this server valid. It does not remove any
installation sources that were manually added.
Information to Specify
The e-mail address for your Novell Login account.
Specify your purchased or 60-day evaluation registration code for the
SLES 10 product.
If you don't specify a code, the server cannot receive any updates or
patches.
Specify your purchased or 60-day evaluation registration code for the
OES 2 product.
If you don't specify a code, the server cannot receive any updates or
patches.
Specify a description to identify this server.