Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual page 170

5 Verify the package selections:
5a In the left frame of the main window, click Software, then under Available Modules, click
Package Selection.
5b On the Package Selection page, make sure the items are the same as you previously
installed on the server. For more information on the add-ons (software selections) that are
selected in the base selections or patterns, see
page
Step
6 If necessary, change the package selections for the target servers:
6a In the Package Selection dialog box, click Configure.
6b On the Software Selection page, click Patterns in the Filter field.
6c Select the specific software items that you want to be added, then click Accept.
6d If you are prompted to accept the AGFA Monotype Corporation End User License
Agreement, click Accept.
6e Accept the automatic changes by clicking Continue in the Changed Packages dialog box.
7 Specify the Partitioning parameters for the target server:
7a In the left frame of the main window, click Hardware, under Available Modules, click
Partitioning, then click the Configure button.
7b Set up partitioning on the first drive as desired, then click Finish.
See the online help for details about limitations.
For more information on partitioning options, see
Installation and Configuration with Yast2 (http://forgeftp.novell.com/yast/doc/SLES10/
autoinstall/CreateProfile.Partitioning.html).
8 Specify the settings for the graphics card and monitor:
8a In the left frame of the main window, click Hardware, under Available Modules, click
Graphics Card and Monitor, then click the Configure button.
8b In the General Options field of the X11 Configuration page, specify the settings that you
want.
8c In the Desktop field of the X11 Configuration page, select the settings that you want for
the Display Manager and Window Manager, then click Next.
8d On the Configure Monitor page, select the applicable monitor vendor and model, then
click Next.
8e Verify the X11 settings. If they are not correct, repeat
If you skip this step, the server keyboard mappings might be German.
9 (Optional) Insert a script to perform a task that you might want, such as a script for removing
partitions:
For more information on custom user scripts, see
forgeftp.novell.com/yast/doc/SLES10/autoinstall/createprofile.scripts.html)in Automatic Linux
Installation and Configuration with Yast2.
9a From the main window, click Miscellaneous > Custom Scripts > Configure.
9b On the User Script Management page, click New.
9c In the File Name field, specify a descriptive name for the script, such as
hello_world_script
170 OES 2 SP2: Installation Guide
28. If the configuration contains the packages and selections you need, skip to
7. If not, continue with Step
.
"Deciding What Patterns to Install" on
6.
"Partitioning" in Automatic Linux
Step 8a
"Custom User Scripts" (http://
and Step 8d.