Installing Oes 2 Sp2; Obtaining Oes 2 Software; Setting Up An Installation Source; Preparing A Network Installation Source - Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual

Installing OES 2 SP2

3
®
Novell Open Enterprise Server (OES) 2 SP2 Linux is an add-on product to SUSE
Enterprise Server (SLES) 10 SP3. When you install and configure OES, you can also install and
configure SLES 10 SP3. Therefore, it is helpful to understand how to perform a SLES 10 SP3
installation.
For detailed information on performing a SLES installation, see the
Administration Guide (http://www.novell.com/documentation/sles10/book_sle_reference/data/
book_sle_reference.html).
This section includes brief steps for performing a full installation of OES and provides information
on the following topics:
"Obtaining OES 2 Software" on page 39
"Setting Up an Installation Source" on page 39
"Installing OES 2 SP2 as a New Installation" on page 43

3.1 Obtaining OES 2 Software

For information on obtaining OES software, see
OES 2 SP2: Planning and Implementation

3.2 Setting Up an Installation Source

This section covers how to get the media you need for an installation and how to set up installation
sources for installing OES:
Section 3.2.1, "Preparing a Network Installation Source," on page 39
Section 3.2.2, "Preparing Physical Media for a New Server Installation or an Upgrade," on
page 42

3.2.1 Preparing a Network Installation Source

This section contains the following information:
"Requirements" on page 39
"Procedure" on page 40
Requirements
To set up a network installation source, you need the following:
A server to act as the YaST
This server can be SLES 9, SLES 10, SUSE Linux 9.3 or later, OES 1 or OES 2, Windows, or
®
NetWare 6.5.
A computer to become the new OES server
"Getting and Preparing OES 2
Guide.
Network Installation server:
TM
®
Linux
SLES 10 SP3 Installation and
Software" in the
Installing OES 2 SP2
3
39