Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual page 92

Page Parameter
Novell iFolder LDAP Configuration
Novell iFolder System Configuration
92 OES 2 SP2: Installation Guide
Install into Existing iFolder Domain: Select this option when you want to attach to an
existing iFolder domain.
If this option is not selected, this server becomes the Master iFolder server.
Default: Deselected
Private URL of the Master Server: Specify the private URL of the Master iFolder server
that holds the master iFolder data for synchronization to the current iFolder Enterprise
Server.
Configure LDAP Groups Plugin: Select this option to configure the LDAP Groups plug-in.
If this option is left unselected, iFolder does not have LDAP Group support enabled.
Directory server address: The IP address shown is the default LDAP server for this
service. If you do not want to use the default, select a different LDAP server in the list.
If you need to add another eDirectory LDAP server to the list, use the LDAP Configuration
for Open Enterprise Services dialog.
If you are installing into an existing tree, ensure that the server you select has a master
replica or read/write replica of eDirectory.
If you are installing into an existing tree, you must enter the password of an admin user in
the tree.
Default: The first server selected in the LDAP Configuration list of servers
Use Alternate LDAP server: If you need to add another LDAP server to the list, select this
option and enter the following information:
Alternate Directory Server Address: Specify the host or IP address of the alternate
LDAP server that iFolder will use.
LDAP Port: Specify the LDAP port to use for this alternate server.
LDAP Secure Port: Specify the LDAP secure port to use for this alternate server.
Admin Name and Context: Specify the administrator name and context for the
alternate LDAP server.
Admin Password: Type the specified administrator's password.
The iFolder Default Administrator: Specify the username for the default iFolder
administrative user. Use the full distinguished name of the iFolder administrative user.
Default: The eDirectory Admin user you specified while configuring eDirectory.
iFolder Admin Password: Specify a password for the iFolder administrative user.
Verify iFolder Admin Password: Type the password for the iFolder administrative user
again.