Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual page 190

disks can use LVM2 or EVMS as needed. In this scenario, NSS volumes are created only on
additional virtual disks, not on the primary virtual disk that you are using for the guest server's
system device.
IMPORTANT: When you create the virtual machine, make sure to configure the size of the
primary virtual disk according to the amount of space you need for the , , and root ( )
/boot swap /
volumes.
If you decide to use EVMS for the system device on the virtual machine, follow the install
instructions in "Section A.2, "Configuring the System Device to Use EVMS," on page 212," just as
you would for a physical machine.
After the virtual machine is set up, you need to perform additional tasks to set up additional Novell
Storage Service (NSS) devices. See "Using NSS in a Virtualization Environment" in the OES 2
SP2: NSS File System Administration Guide.
190 OES 2 SP2: Installation Guide