Preparing Edirectory For Oes 2 Sp2; If Your Directory Tree Is Earlier Than Edirectory 8.6; If Your Ldap Server Is Running Netware 6.5 Sp2 Or Earlier - Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual

2.6 Preparing eDirectory for OES 2 SP2

Section 2.6.1, "If Your Directory Tree Is Earlier than eDirectory 8.6," on page 22
Section 2.6.2, "If Your LDAP Server Is Running NetWare 6.5 SP2 or Earlier," on page 22
Section 2.6.3, "If Your Tree Has Ever Contained an OES 1 Linux Server with LUM and NSS
Installed," on page 23
Section 2.6.4, "Extending the Schema," on page 26

2.6.1 If Your Directory Tree Is Earlier than eDirectory 8.6

If you are installing an OES 2 server into an eDirectory tree that is earlier than eDirectory 8.6, do the
following before installing your first OES server in an existing NetWare tree:
1 Extend the schema by using Deployment Manager. See
Installation
2 Ensure that the schema is synchronized throughout the tree from [ROOT] by doing the
following:
2a Verify that schema is synchronizing out from [ROOT] by entering the following
commands at the System Console prompt of the NetWare server with the Master of
[ROOT]:
set DSTRACE=on
set DSTRACE=nodebug
set DSTRACE=+Schema
set DSTRACE=*SSD
set DSTRACE=*SSA
2b Toggle to the Directory Services screen and look for the message:
YES
2c On each server that holds a Master of a partition, enter the following commands at the
System Console prompt:
set DSTRACE=off
set DSTRACE=nodebug
set DSTRACE=+Schema
set DSTRACE=*SS
2d Toggle to the Directory Services screen and look for the message:
YES
2.6.2 If Your LDAP Server Is Running NetWare 6.5 SP2 or
Earlier
If you are installing into an eDirectory tree that is using a NetWare server to supply LDAP, upgrade
the LDAP server that the OES installation will communicate with to the NetWare 6.5 SP3 or later
software. A server running NetWare 6.5 SP2 or earlier will probably abend.
22 OES 2 SP2: Installation Guide
Guide.
"Schema Update" in the
All Processed =
All Processed =
NW65 SP8: