If you plan to schedule the upgrades to happen later, you have the option to do the steps later. Just
make sure that they are completed before the upgrade process begins.
1 Make sure there are no Mozilla applications running on the OES 2 SP1 servers you are
upgrading.
2 On any servers that have the ZENworks Agent installed for the first time, check whether the
SLES 10 SP2 and OES 2 SP1 installation sources are listed in YaST Control Center >
Installation Source.
If the sources are not listed, add them back before starting the upgrade. Otherwise, the upgrade
pauses with a yast2 pop-up asking whether to continue, and manual intervention is required to
complete the upgrade.
3 Set the maximum cache size on each OES 2 SP1 server to 2 GB using the following command:
rug set cache-max-size-in-mb 2048
For more information, see
Linux Management Administration
D.7 Assigning the Bundles and Scheduling the
Upgrades
TIP: If you have a large-scale deployment, remember that you can set separate bundle deployment
and installation schedules.
1 Assign the SLES10-SP3-Pool catalog to the OES 2 SP1 servers:
1a In ZENworks Control Center, click Bundles.
1b Click SLES10-SP3-Pool.
1c In the left column, select the SLES10-SP3-Pool catalog entry.
1d Click Action > Assign Catalog.
1e Click Add, click the down-arrow by Servers, then select the servers you want to assign.
1f Click OK > Next > Next > Finish > OK.
2 Assign the OES2-SP2-Pool catalog to the OES 2 SP1 servers:
2a In the ZENworks Control Center, click Bundles.
2b Click OES2-SP2-Pool.
2c In the left column, select the OES2-SP2-Pool catalog entry.
2d Click Action > Assign Catalog.
2e Click Add, click the down-arrow by Servers, then select the servers you want to assign.
2f Click OK > Next > Next > Finish > OK.
3 Assign the SLES10-SP3-Online-bundle to the OES 2 SP1 servers, and schedule the bundles to
install appropriately:
3a In the ZENworks Control Center, click Bundles.
3b Click SLES10-SP3-Online.
3c In the left column, select the SLES10-SP3-Online-bundle entry.
3d Click Action > Assign Bundle.
"ZENworks Agent (zmd) Cache
Guide.
Upgrading to OES 2 SP2 Through a ZENworks Linux Management Server 239
Settings" in the
Novell ZENworks