Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual page 53

A description of each pattern displays to the right of the pattern when it is selected. For a
description of OES Services patterns and the components selected with each pattern, see
Table 2-4 on page
You can manually change the default SLES selections by changing the install status and
selecting the patterns offered in each category.
IMPORTANT: If you deselect a pattern after selecting it, you are instructing the
installation program to not install that pattern and all of it dependent patterns. Rather than
deselecting a pattern, click Cancel to cancel your software selections, then click the
Software heading again to choose your selections again.
Selecting only the patterns that you want to install ensures that the patterns and their
dependent patterns and packages are installed.
If you click Accept, then return to software pattern selection page, the selections that you
made become your base selections and must be deselected if you want to remove them
from the installation proposal.
You must install at least one of the SLES Base Technologies patterns.
Selecting a pattern automatically selects the other patterns that it depends on to complete
the installation.
You can view the details of your selection and add or remove specific packages for the
installation by clicking Details.
3 When you have selected the software components that you want to install, click Accept.
4 If you are prompted with the license agreement for Professional TrueType Fonts, click Accept.
29.
Installing OES 2 SP2 53