Configuration Information For Zenworks 10 Configuration Management On Zenworks Appliance - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ZENWORKS APPLIANCE DEPLOYMENT AND ADMINISTRATION REFERENCE 10.3 16-04-2010 Deployment Manual

4d Manually launch the ZENworks Reporting Server Wizard to configure the ZENworks
Reporting Server.
For more information on how to manually launch the ZENworks Reporting Server Wizard
and configure the ZENworks Reporting Server, see
Reporting Server Wizard" on page
3.2.3 Configuration Information for ZENworks 10 Configuration
Management on ZENworks Appliance
The information you need is listed in the order of the configuration flow of the ZENworks 10
Configuration Management Wizard.
Configuration Information
Table 3-1
Wizard Page
Management
Zone
18 ZENworks 10 Configuration Management Appliance Deployment and Administration Reference
Details
New Zone: If you are deploying to the first server in the zone, you need to know
what name you want for the Management Zone and what you want to use for the
zone's password, which is used for logging in to ZENworks Control Center.
The zone name has a 20-character limit and should be a unique name. We
recommend the zone name to contain minimum six characters.
The zone name can contain only the following special characters: - (dash) _
(underscore) . (period).
The zone administrator password must contain at least six characters and is
limited to a maximum of 255 characters. The password can contain only one
instance of the $ character.
By default, the login username is
deployment, you can use ZENworks Control Center to add other administrator
names that can be used to log in to the Management Zone.
During the deployment of the second (or subsequent) Primary Server, the server
by default uses the ports used by the first Primary Server. If the ports are in use
on the second Primary Server, you are asked to specify another port. Note which
port you specify because you need to use it in the URL for accessing ZENworks
Control Center.
Existing Zone: If you are deploying to an existing Management Zone, you need
to know the following information:
Server identification (either the DNS name or IP address). This is any
existing Primary Server in the zone. We recommend using the DNS name to
provide ongoing synchronization with certificates that are signed with DNS
names.
The username for logging in to ZENworks Control Center. The default is
. After completing the deployment, you can use ZENworks
Administrator
Control Center to add other administrator names that can be used to log in
to the Management Zone.
The administrator's password. Specify the current password for the
ZENworks administrative user specified in the Username field.
"Manually Launching the ZENworks
24.
Administrator . After completing the