Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual page 57

Service
UDP
To adapt the automatic settings to your own preferences:
1 Click Change > Firewall.
2 In the left panel, select the settings you want to change, then make the changes in the right
panel.
3 When you are finished, click Accept.
For more information about the firewall, see
in the SUSE Linux Enterprise Server Installation and Administration Guide (http://
www.novell.com/documentation/sles10/book_sle_reference/data/
sec_fire_suse.html#sec_fire_suse_yast).
To disable the firewall:
1 On the Network Configuration page, under the Firewall heading, click enabled on the Firewall
is enabled status line.
When the firewall is disabled, the status for Firewall should read Firewall is disabled.
2 When all settings in the Network Configuration page are set as desired, click Next to save the
configuration, then continue with
Testing the Connection to the Internet
On the Test Internet Connection page:
1 Select Yes, Test Connection to the Internet, then click Next.
Obtaining the latest SUSE release notes might fail at this point. If it does, view the log to verify
that the network configuration is correct, then, click Next.
If the network configuration is not correct, click Back > Back and fix your network
configuration. See "Network Interface" on page
Skipping this test also skips downloading release notes, configuring the Novell Customer
Center, and updating online.
2 Continue with
"Specifying Novell Customer Center Configuration Settings" on page
skip this test, continue with
Specifying Novell Customer Center Configuration Settings
To receive support and updates for your OES 2 SP2 server, you must register it in the Novell
Customer Center. When the Novell Customer Center Configuration page is displayed, you have two
options. You can choose to register the server during the installation or register it later.
To register the server and get online updates after the installation is complete:
1 Click Configure Later.
2 Continue with "Specifying Service Configuration Settings" on page
3 Register the server after the installation is complete by using the procedures in
"Registering the Server in the Novell Customer Center," on page
Default Ports
Section 44.4.1, "Configuring the Firewall with YaST"
"Testing the Connection to the Internet" on page
55.
"Specifying Service Configuration Settings" on page
524
63.
63.
Section 7.3,
149.
Installing OES 2 SP2
57.
57. If you
57