Specifying The Partition To Update - Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual

5.4.7 Specifying the Partition to Update

YaST tries to determine the correct root (
can't definitely determine the correct root partition, the Select for Update page displays.
IMPORTANT: If no partitions are listed, you are attempting to upgrade an i386 installation using
x86_64 media. Mixing architectures in an upgrade is not permitted. See
Upgrade Paths," on page
1 If there is only one partition listed, click Next.
2 If there are several partitions, select the partition with
For example, make sure you select the
lvm/...
3 Click Next.
YaST reads the old fstab on this partition to analyze and mount the file systems listed there.
Next, YaST tries to mount the boot (
4 If no error displays, skip to
page 124.
If you have EVMS on your system disk, you might get an error stating that the partition could
not be mounted:
122 OES 2 SP2: Installation Guide
109. You must start the upgrade again, using i386 installation media.
partition.
"Specifying the Add-On Product Installation Information" on
) partition. If there are several possibilities, or if YaST
/
/evms
. partition rather than the /
/dev/evms/lvm/..
) partition.
/boot
Section 5.1, "Supported
in the path.
dev/