Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual page 74

Guidelines for Configuring OES Components
Table 3-4
Issue
Software
Selections When
Using Text-Based
YaST
Specifying a State
identifier for a
Locality Class
object
Specifying Typeful
Admin Names
74 OES 2 SP2: Installation Guide
Guideline
Some older machines, such as Dell
the video card does not meet SLES 10 specifications. When you go into the
Software Selection, and then to the details of the OES software selections, YaST
doesn't bring up the OES selections like it does when you use the graphical YaST
(YaST2).
To view the Software Selection and System Task screen, select Filter > Pattern (or
press Alt+F > Alt+I).
If you to specify a state identifier, for example California, Utah, or Karnataka, as a
Locality Class object in your eDirectory tree hierarchy, you must make sure to use
the correct abbreviation in your LDAP (comma-delimited) or NDAP (period-
delimited) syntax.
When using LDAP syntax, use "st" to specify a state. For example
ou=example_organization,o=example_company,st=utah,c=us
When using NDAP syntax, use "s" to specify a state. For example
ou=example_organization.o=example_company.s=utah.c=us
When installing OES, you must specify a fully distinguished admin name by using
the typeful, LDAP syntax that includes object type abbreviations (cn=, ou=, o=,
etc.). For example, you might specify the following:
cn=admin,ou=example_organization,o=example_company
*
1300, use the text mode install by default when