Specifying Configuration Information - Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual

The base installation settings are applied and the packages are installed.
4 While the server is updating the files, do one of the following:
For installations using a network installation source, remove the boot CD
(SUSE Linux Enterprise Server 10 SP3 CD 1) from the CD drive.
For installations using a CD or DVD installation source, leave the CD or DVD in the CD-
ROM or DVD drive. When the installation process prompts you for each CD at the
appropriate time, insert the CD. The progress status at the bottom of the screen indicates
which CD will be prompted for next.
5 After the server reboots, continue with
TIP: If you have the disk driver situation mentioned in
to a prompt for the root password. Specify the password, and then use an editor such as VI to
modify the
reboot the server. The upgrade should continue normally.

5.4.12 Specifying Configuration Information

When the server reboots, you are required to complete the following configuration information:
"Testing the Connection to the Internet" on page 130
"Specifying Novell Customer Center Configuration Settings" on page 131
"Updating the Server Software During the Upgrade" on page 133
"Upgrading eDirectory" on page 136
"Specifying LDAP Configuration Settings" on page 137
"Configuring Novell Open Enterprise Server Services" on page 137
Testing the Connection to the Internet
On the Test Internet Connection page:
1 Select Yes, Test Connection to the Internet, click Next, then continue with.
130 OES 2 SP2: Installation Guide
file so that the path to the boot partition uses sda instead of hda. Then
/etc/fstab
"Specifying Configuration Information" on page
Step 8 on page
54.
124, your server boots