Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual page 127

6 All of the OES Services patterns that were previously installed are selected by default.
Ensure that the patterns for the services you are upgrading are selected, and select the patterns
for any new OES Services patterns that you might want to also install, such as Novell AFP or
Novell CIFS.
A description displays to the right of a pattern when the pattern is selected. For a description of
OES Services patterns and the components selected with each pattern, see
page 29.
Some OES services, such as Novell CIFS and Novell Samba, are not supported together on the
same server. For more information about unsupported service combinations, see
Service Combinations" in the
IMPORTANT: If you deselect a pattern after selecting it, you are instructing the installation
program to not install that pattern and all of it dependent patterns. Rather than deselecting a
pattern, click Cancel to cancel your software selections, then click the Select Patterns heading
again to choose your selections again.
Selecting only the patterns that you want to install ensures that the patterns and their dependent
patterns and packages are installed.
If you click Accept, then return to software pattern selection page, the selections that you made
become your base selections and must be deselected if you want to remove them from the
installation proposal.
Be aware also that attempting to uninstall a service by deselecting its pattern is not
recommended. For more information, see
page 207.
OES 2 SP2: Planning and Implementation
Chapter 13, "Disabling OES 2 Services," on
Table 2-4 on
"Unsupported
Guide.
Upgrading to OES 2 SP2 127