Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual page 83

Page Parameter
Use Secure Channel for Configuration: Leaving this option selected causes DHCP
configuration information to be transferred over a secure channel.
Deselecting the option lets a user with fewer privileges configure LDAP services and allows
configuration information to be transferred over a non-secure channel.
Default: Selected
LDAP User Name with Context: Specify a typeful, distinguished name and context for an
LDAP user.
This user should be an eDirectory user that can access the DHCP server.
Default: The eDirectory Admin name and context that you specified when configuring
eDirectory.
LDAP User Password: Type a password for the LDAP user.
LDAP Port for DHCP Server: Select a port for the LDAP operations to use.
Default: 636
Use Secure LDAP Channel: When selected, this option ensures that the data transferred
between the DHCP server and the LDAP server is secure and private.
If you deselect this option, the data transferred is in clear text format.
Default: Selected
Certificates (optional)
Request Certificate: Specifies what checks to perform on a server certificate in a SSL/
TLS session. Select one of the following options:
Never: The server does not ask the client for a certificate. This is the default
Allow: The server requests a client certificate, but if a certificate is not provided or
a wrong certificate is provided, the session still proceeds normally.
Try: The server requests the certificate. If none is provided, the session proceeds
normally. If a certificate is provided and it cannot be verified, the session is
immediately terminated
Hard: The server requests a certificate. A valid certificate must be provided, or the
session is immediately terminated.
Paths to Certificate Files: Specify or browse the path for the certificate files.
The LDAP CA file contains CA certificates
The LDAP client certificate contains the client certificate.
The LDAP client key file contains the key file for the client certificate.
Novell DHCP Services Interface Selection
Network Boards for the Novell DHCP Server: From the available interfaces, select the
network interfaces that the Novell DHCP server should listen to.
For additional configuration instructions, see
SP2: Novell DNS/DHCP Administration Guide for
"Installing and Configuring DHCP
Linux.
" in the OES 2
Installing OES 2 SP2 83